Posts

Showing posts from August, 2019

वक्रतुण्ड महाकाय सूर्यकोटि समप्रभ। निर्विघ्नं कुरु मे देव सर्वकार्येषु सर्वदा॥

Image

GNSS

According to the constellation information of the European GNSS Agency, most of the #Galileo satelites are usable again. Service has been restored (with potential instability). https://lnkd.in/dbPueRw #NAGU2019025 #NAGU2019026 #NAGU2019027

Galileo Signal Outage!

Galileo users may expierience service degradation on all Galileo satellites, meaning that the signals may not be available nor meet the minimum performance levels. For further information, please visit: https://lnkd.in/d9jBzBV

GPS receiver with a Raspberry Pi

Image
In this week's blog post Johannes Weber shows how to use a GPS receiver with a Raspberry Pi to build a stratum 1 NTP server. https://lnkd.in/d6RTctD

GPS Antenna Distribution Unit (ADU).

Image
Secure signal transmission over long distances with Meinberg's new GPS Antenna Distribution Unit (ADU). The distribution unit can connect a Meinberg GPS antenna/converter to up to eight Meinberg GPS receivers via single mode fiber lines. Learn more about the new ADU system: https://lnkd.in/d2MfnSp

Use Cases for Timing in Power Grids

Image
Check out our new blog post "Use Cases for Timing in Power Grids", written by Dr. Andreja Jarc, Director of the Meinberg Sync Academy. https://lnkd.in/dJUzQ_6

Meinberg sets highest value on quality.

In-house production and continuous production process optimization guarantee a high level of quality. Watch this new video for a short insight of Meinberg's product creation process. Video-URL: https://lnkd.in/gUE-gxR Learn more about the new microSync: https://lnkd.in/gqysa-Z

GNSS MULTI BAND Based Time Synchronization

Image
The new multi-band GNSS receiver module with nanosecond-level timing accuracy will be available in Q4/2019. − Up to 4 GNSS constellations can be used in parallel (GPS, Galileo, GLONASS, Beidou) − Dual Frequency Support for GPS (L1, L2), Galileo (E1, E5), GLONASS (L1OF, L2OF) and Beidou (B1l, B2l) with new multiband antenna − 184 Channels − Automatic ionospheric correction − Built-in security for highest robustness against malicious attacks − Fully compatible with all Meinberg IMS systems, can be added to a free clock slot or replace an existing clock module #GNSS #GPS #Galileo #GLONASS #Beidou

Profile Isolation" from the series "What’s Coming in the next Edition of IEEE 1588"

Image
Check out our new blog post about "Profile Isolation" from the series "What’s Coming in the next Edition of IEEE 1588", written by Dr. Doug Arnold, Principal Technologist at Meinberg USA and Co-Chair of the IEEE 1588 Working Group and Architecture Subcommittee. #IEEE1588 #PTP https://lnkd.in/dAmVqsC

#IMS-BPE: New IMS Modules for Standard Output Signals Available

Image
Our new BPE8000 series will gradually replace the previous series of our Basic Port Expansion modules. Compared to the preconfigured 2000 series modules, the 8000 series provides various configurations of output signals at the physical connectors of the module. As requirements of application environments change, combinations of output signals can easily be set up via the web interface of the IMS system. Read our latest newsletter to learn more: https://lnkd.in/dQUu9DW Or visit our IMS-BPE product website: https://lnkd.in/dpP9HFf